QPL-43616/16 - Cleaning Compound, Aircraft Surface
A-A-1544 - Cleaning Compound, Solvent (Non-Conductive, Non-Film Forming, Degreasing)
A-A-16 - Cleaning Compound, Acid Pipeline (Sulfuric Acid, For Industrial Use)
A-A-1664 - Bleach, Laundry, Active Oxygen (Sodium Percarbonate)
This commercial item description covers an oxygen type granular laundry bleach based on sodium percarbonate.
A-A-1796 - Cleaning Compound, Solvent-Detergent (For Air-Conditioning Coils & Filters)
A-A-19 - Scale Removing Compound (Powder, Sulfamic Acid)
This CID covers a powder form scale removing compound, hereafter referred to as "compound", intended for removing scale deposits normally found in salt water evaporators, fresh water cooling and distribution systems, and water side scale found in heat transfer units. This compound can be used for removing scale deposits normally found in commercial dishwashing machines.
A-A-1911 - Cleaning Compound, Alkali, Pipeline
A-A-2949 - Deicing Compound (Calcium Magnesium Acetate)
This commercial item description covers a calcium magnesium acetate (CMA) formulation designed for use as a snow and ice control agent on roads, highways, and bridges,and which can be handled and applied with the same equipment used with road salt (sodium chloride).
A-A-33 - Scale Removing Compound (Liquid)
This CID covers a liquid form scale removing compound, hereafter referred to as "compound," intended for removing scale deposits from environmental surfaces, commercial dishwashing machines, and boiler coilers. This compound can be used in laboratories, food handling and processing areas, veterinary areas, and dairy plants.
A-A-50169 - Skin Protective Compounds, Chemical Barrier
This commercial item description covers skin protective compounds of the following three types. None of these compounds are intended to provide protection against chemical or biological warfare agents: Type I - Water dispersible compound (for protection against staining and adhering compounds). Type II - Water miscible compound (for protection against hydrocarbons, oils, solvents, etc.). Type III - Water insoluble compound (for protection against dilute acids, alkalies, and other water miscible chemicals).
A-A-50193 - Ethylene Absorber/Shelf-Life Extender Blanket, Potassium Permanganate, for Fresh Fruits and Vegetables
This commercial item description (CID) covers a porous fabric blanket containing ethylene-absorbing material. The blanket is intended to extend the shelf-life of fresh fruits and vegetables when it is used in their storage.
A-A-50423 - Applicator, Self-Pressurized Can, Brush-Type, For Use With Isopropyl Alcohol Solvent (Aerosol Brush Applicator For Isopropyl Alcohol)
This description covers an assembly that dispenses a pressurized solvent (isopropyl alcohol) for used in cleaning electrical components on aircraft.
A-A-50425 - Cleaning Compound, Halogenated Hydrocarbon, for Oxygen System Components, Aerosol (Spot Cleaner) (No S/S Document)
A-A-50427 - CLeaning Compound, Solvent, 1,1-Dichloro-1-Fluoroethane, HCFC-141B, for Oxygen Systems
This commercial item description (CID) covers the requirements for 1.1-dichloro-1-fluoroethane cleaning compound solvent for use in oxygen systems cleaning.
A-A-52091 - Bleach, Laundry, Organic Chlorine
A-A-52100 - Spot Remover (For Removal Of Oil And Grease From Clothing)
This commercial item description (CID) covers one type of spot remover to be used as an aid for removing oil and grease stains from washable fabrics, including permanent press, by application to the stains prior to washing.
A-A-52119 - Sachet, Chlorine, Flocculating, Emergency Water Purification
This commercial item description (CID) covers a chlorine flocculating emergency water purification sachet, packed in commercially acceptable containers, suitable for use by the Federal Government.
A-A-52122 - Kit, Water Purification, Emergency
This commercial item description (CID) covers one type of emergency water purification kit recommended for use in situations where municipal treated water is not provided or where the available water is suspected of being polluted.
A-A-56022 - Compound, Heat Sink, Silicone And/Or Non-Silicone (S/S By Mil-C-47113)
This commercial item description covers a silicone and/or non-silicone and/or non-silicone heat sink compound which is applied to the base and mounting studs of transistors and diodes to provide a positive heat sink seal and improve thermal conductivity at heat sink junctions.
A-A-711 - Dry Cleaning Solvent (S/S By Astm-D235)
A-A-870 - Antifreeze/Coolant, Engine: Ethylene Glycol, Inhibited Concentrated (S/S By A-A-52624)
This description covers antifreeze conforming to the requirements of ASTM D3306. In addition, the antifreeze must be formulated to privide adequate corrosion resistance when used in vehicles with aluminum engine components and must have a heat transfer corrosion rate of less than 1.0 mg/cm2/week when tested in accordance with ASTM D4340.
AN4043 - Cartridge Assembly & Corrosion Inhibitor Drain (Use Ms26541)
DOD-A-24682 - Additive, Fuel Oil Stabilizer
This specification covers one type of fuel-soluble additive. When required, it shall be used for stabilizing middle distillate fuels.
DOD-F-87935 - Fluid, Magnetic Particle Inspection, Suspension Medium (Metric) (S/S By A-A-59230)
This specification covers Magnetic Particle Inspection fluid for use as a suspension vehicle while performing magnetic particle nondestructive inspections.
JAN-O-592 - Ointment, Protective, M5
JJJ-G-821 - Gum, Preservative And Etch, For Offset Duplicating Process (S/S By Jjj-L-821)
JJJ-L-821 - Lithographic Plate Preserving Gum
MIL-A-11755 - Antifreeze, Arctic-Type (S/S By A-A-52624)
This specification covers one type of antifreeze compound for use in the cooling system of liquid-cooled internal combustion engines for protection against freezing in ambient temperatures as low as -68 Deg. C.
MIL-A-13550 - Antifogging Kit, M1
This specification covers one typeof chemical-biological mask antifogging kit.
MIL-A-15042 - Antifogging Compound, Eye Protective Equipment (Use Mil-A-13550)
MIL-A-21071 - Antifogging Compound, Transparent Aircraft Enclosures
This specification establishes the formulation and requirements for an antifogging material that is dissolved in a fluorocarbon type solvent.
MIL-A-23051 - Anti-Icing Fluid, Freezing Rain
MIL-A-28844 - Antiwetting Compound 3-Hept
This specification covers the requirements and tests for technical grade antiwetting compound 3-(heptafluoroisopropoxy) propyltrichlorosilane (3-HEPT).
MIL-A-46153 - Antifreeze, Ethylene Glycol, Inhibited, Heavy Duty, Single Package (S/S By A-A-52624)
This specification covers one type of antifreeze compound for use in the cooling system of liquid-cooled internal combustion engines other than aircraft for protection against freezing in ambient temperatures as low as -51 deg. C.
MIL-A-53009 - Additive, Antifreeze Extender, Liquid Cooling Systems
This specification covers one type and one grade of additive intended for inhibiting water or reinhibiting used MIL-A-46153 antifreeze.
MIL-B-10854 - Binder, Cellulose Mitrate-Camphor (For Pyrotechnic Mixtures)
MIL-B-22743 - Bleach, Laundry, Organic, Powdered (Use O-B-420)
MIL-B-24155 - Boiler Scale Removing Compound
This specification covers a dual packaged compound to be used as a scale remover on medium and high pressure boilers. One package shall contain a uniform mixture of crystalline sulfamic acid, anhydrous citric acid, and microfine silica. The other package shall contain the acid inhibitor, diethylthiourea.
MIL-B-3242 - Boiler Compound, Navy (Use O-S-639 And O-S-642)
MIL-B-51002 - Biological Decontaminating Candle, Sulfur Dioxide, M8
MIL-B-6810 - Brightener Compound, Copper Oil Cooler
MIL-B-81744 - Barrier Coating Solution, Lubricant Migration Deterring
This specification covers the requirements for a lubricant-migration-deterring barrier coating solution consisting of a fluoropolymer identified as poly (1H, 1H-pentadecafluorooctyl) dissolved in xylene hexafluoride.
MIL-B-81744/1 - Barrier Coating Solvent
MIL-C-0010597 - Cleaning Compound With Conditioner For Engine Cooling Systems
MIL-C-0022543 - Cleaning Compound, Aircraft Surface (Alkaline Organic Water Base Emulsion) (Use Mil-C-43616)
MIL-C-10325 - Cleaning Compound, Baking Pans (Tinned And Black Iron Pans)
MIL-C-10578 - Corrosion Removing And Metal Conditioning Compound (Phosphoric Acid Base)
This specification covers five types of concentrated phosphoric acid corrosion removing and metal conditioning compound which, when diluted with water and applied to metal surfaces, will remove rust from ferrous metal surfaces and provide a slight etching action for ferrous and nonferrous metals to promote the adhesion of paint or corrosion preventives (see 6.1).
MIL-C-10597 - Cleaning Compound With Conditioner And Inhibitor For Engine Cooling Systems
This specification covers one type and grade of cleaning compound, conditioner and inhibitor supplied in a kit, for cleaning, conditioning and inhibiting liquid cooling systems of engines on motor vehicles.
MIL-C-10657 - Catalyst, Carbon Monoxide Oxydizing (Low Temperature)
MIL-C-12156 - Cleaner, Anti-Static (For Ordnance Use)
MIL-C-12389 - Catalyst, Hydrogen And Carbon Dioxide, Methanol-Water Type
MIL-C-12968 - Coatings, Phosphate, Protective (For Iron And Steel) (Use Mil-P-16232)
MIL-C-13713 - Compound, Cooling-System Conditioning And Antiseepage
MIL-C-14460 - Corrosion Removing Compound, Sodium Hydroxide Base; For Electrolytic Or Immersion Application (S/S By A-A-59260)
MIL-C-15348 - Cleaning Oil, Turbine (Compounded) (S/S By Mil-L-17331 Now Mil-Prf-17331)
MIL-C-16553 - Cleaning Solution, And Rinsing Solution--Watch, Waterless (Use O-C-435)
MIL-C-1839 - Compound, Electrolyte And Cleaner (For Can Reconditioning)
MIL-C-18718 - Cleaning Compound, Solvent (Use O-C-1889)
MIL-C-19647 - Corrosion Removing Compound, Paste (Phosphoric Acid Base) (S/S By Mil-C-10578)
MIL-C-19853 - Carbon Removing Compound (For Use In Agitated Tank) (S/S By Sae-Ams-C-19853)
MIL-C-20207 - Cleaning Compound, Solvent, Grease Removal, Heavy Duty (S/S By O-C-1824)
MIL-C-20217 - Compound, Carburizing
MIL-C-21665 - Catalyst, Carbon Monoxide And Hydrocarbon Oxydizing (For Use In An Air Purifying Device Aboard Submarines)
This specification covers one grade of catalyst for atmospheric air purification.
MIL-C-22230 - Cleaning Compound, Fuel Tank And Bilge
This specification covers cleaning compound for use in cleaning fuel oil tanks and machinery space bilges.
MIL-C-22542 - Cleaning Compound, High Pressure Cleaner, Liquid (S/S By Sae-Ams-C-22542)
The specification establishes the requirements for a liquid cleaning compound intended for use in steam cleaning machines to clean metallic and painted, soiled surfaces.
MIL-C-22543 - Cleaning Compound, Aircraft Surface (Alkaline-Organic-Water Base Emulsion )Use Mil-C-43616(
MIL-C-22550 - Cleaning Compound, Waterless, Aircraft Surface (Use P-H-0031)
MIL-C-24208 - Chemical, Testing, Dissolved Oxygen (Colorimetric), Naval Shipboard
MIL-C-25107 - Carbon Removing Compound, Orthodichlorobenzene, For Engine Parts
This specification covers one type and grade of carbon remover for use in conveyorized and engine overhaul cleaning systems at Air Force depots.
MIL-C-25343 - Certification Of Penetrant Inspection Personnel(S/S By Mil-Std-410)
MIL-C-25378 - Compound, Metal Conditioner And Brightener (For Use On Aluminum Surfaces)
MIL-C-25769 - Cleaning Compound, Aircraft Surface, Alkaline Water Base (S/S By Mil-C-87936)
MIL-C-25924 - Cleaning Compound, Solvent, Reciprocating Engine, For Low Temperature Use
MIL-C-27251 - Cleaning Compound, Aircraft Surface, Low Temperature
MIL-C-2751 - Compound, Soot-Remover
MIL-C-2799 - Chemicals, Fire-Retardant (Recommended Treating Practice)
MIL-C-2865 - Chemicals, Fire-Retardant, For Lumber And Timber
MIL-C-29584 - Compound, Cleaning, Water Miscible For Aircraft Automatic Weapons And Aircraft Automatic Gun Systems
This specification establishes the requirements for a biodegradable, water miscible, low foaming cleaning compound.
MIL-C-38334 - Corrosion Removing Compound, Prepaint, For Aircraft Aluminum Surfaces (S/S By Sae-Ams1640)
MIL-C-38736 - Cleaning Compound, Solvent Mixtures (Metric) (S/S By A-A-59281)
MIL-C-43454 - Cleaning Compound, Official Lens (Ready To Use)
MIL-C-43616 - Cleaning Compounds, Aircraft Surface (S/S By A-A-59921)
This specification covers the requirement for two classes of aircraft surface cleaning compounds.
MIL-C-46156 - Corrosion Removing Compound, Sodium Hydroxide Base, For Immersion Application (S/S By A-A-59261)
This specification covers a corrosion removing compound, containing sodium hydroxide, chelating and sequestering agents, wetting agents and detergents, a polyhydroxy compound, inhibitors and accelerating agents. A solution of this compound at elevated temperature will remove rust, paint, scale, grease, dirt, asphalt and carbon immersion, from ferrous surfaces. An additive composition to be used for the purpose of prolonging the tank life of the product, is also covered by this specification.
MIL-C-490 - Cleaning And Preparation Of Ferrous And Zinc Coated Surfaces For Organic Protective Coatings (S/S By Tt-C-490)
This specification covers the cleaning and preparation of iron, steel and zinc-coated steel for the application of organic coatings (paint, varnish, lacquer, enamel, etc.).
MIL-C-51047 - Compound, Antiseepage, For Cooling System, Internal Combustion Engine (Metric) (S/S By Astm-D6107)
This specification covers one type and grade of antiseepage compound for use in the cooling system of internal combustion engines.
MIL-C-51052 - Cleaning Compound For Water Wash Paint Spray Booth
MIL-C-51226 - Curing Agent, Imine-Type, Liquid
MIL-C-51340 - Cleaning Compound, Electrical
MIL-C-52399 - Cleaning Compound, Solvent
MIL-C-52412 - Cleaning Compound, High-Pressure Cleaner, Steam
MIL-C-5410 - Cleaning Compound, Aluminum Surface, Non-Flaming-Sustaining
MIL-C-5543 - Cleaning Compound, Washing Machine, Aircraft Metal Parts (Use Fed-Spec P-C-437)
This specification covers one type of cleaning compound for use in industrial spray washing machines.
MIL-C-5545 - Corrosion Preventive, Aircraft Engine, Heavy Oil Type
This specification establishes the requirements for the heavy oil type reciprocating aircraft engine corrosion preventive (see 6.1).
MIL-C-5546 - Compound, Engine Cleaning (Cresol Base) (Use P-C-111)
MIL-C-5547 - Compound, Polishing (For Acrylic Plastic) (Use Mil-C-18767)
MIL-C-81302 - Cleaning Compound, Solvent, Trichlorotrifluoroethane
This specification establishes the requirements for a 1, 1, 2-trichloro 1,2, 2-trifluoroethane solvent (see 6.1.).
MIL-C-81964 - Cleaning Compound, Avionics Components(S/S By Mil-Prf-29608)
This specification covers a cleaning compound designed for use on avionic components.
MIL-C-83360 - Cleaning And Lubricating Compound, Electrical Contact (S/S By Mil-Prf-29608)
This specification covers the two types of cleaner-lubricating compounds and one type of cleaner-non-lubricant compound designed for use in cleaning and lubricating electrical contacts.
MIL-C-83873 - Cleaning Compound, Precoating Surface, Aircraft And Aerospace Ground Equipment (Age) (S/S By Mil-C-87937)
This specification establishes the requirements for biodegradable, enzyme based, precoating surface cleaners.
MIL-C-85447 - Cleaning Compounds, Electrical And Electronic Components
This specification covers the requirements for two types and two compositions of a cleaning compound formulated for removing solder flux residue and other contaminants from electrical and electronic components.
MIL-C-8638 - Cleaning Compound, Oxygen Systems (Use Mil-C-81302)
MIL-C-87159 - Cleaning Compound, Water Dilutable, Heavy Duty, For Aircraft Surfaces (S/S By Mil-C-87936)
MIL-C-878 - Compound, Antifreeze (Nonvolatile) (S/S By O-A-548)
MIL-C-87936 - Cleaning Compounds, Aircraft Exterior Surfaces, Water Dilutable (S/S By Mil-C-87937)
This specification covers two types of concentrated cleaning compounds for removal of soils from aircraft surfaces. Requirements listed in this specification apply to both types unless otherwise noted.
MIL-C-943 - Catalyst, Screen
MIL-D-19418 - Deicing-Defrosting Fluid, 10 To 32 Degrees F Range
MIL-D-22365 - Decontaminating Agent, Ethylene Oxide (In 12 Ounce Dispenser, Aerosol Type, M-10)
MIL-D-26549 - Descaling Compound, Alkaline, Hot Section Jet Engine Parts (S/S By Sae-Ams1380)
This specification covers the requirements for one grade of alkaline descaling compound suitable for removal of carbon deposits, complex metallic oxides, and heat scale from hot section jet engine parts.
MIL-D-3464 - Desiccants, Activated, Bagged, Packaging Use And Static Dehumidification
This specification covers bagged, chemically inert, dehydrating agents that prevent corrosion and mildew by adsorbing the moisture from the air of an enclosed space.
MIL-D-3716 - Desiccants, Activated For Dynamic Dehumidification
This specification covers desiccants that remove moisture from air, other gases, and from liquids by dynamic means and that offer an approximate indication of the relative humidity of an enclosed space.
MIL-D-50030 - Decontaminating Agent, Ds2 (S/S By Mil-Dtl-12468)
This specification covers a solution type decontaminating agent hereinafter referred to as DS2.
MIL-D-51018 - Decontaminating Agent: Biological, Beta-Propiolactone
MIL-D-51146 - Decontaminating Agent, Biological, Ethylene Oxide Propellant Mixture
This specification covers one type of biological decontaminating agent consisting of an ethylene oxide-propellant mixture.
MIL-D-83411 - Deicer/Anti-Icer Fluid (For Runways And Taxiways (S/S By Ams-1432)
This specification covers the requirements for a corrosion inhibited, biodegradable, liquid chemical deicer/anti-icer material. Environmental control is required as specified in 6.2.
MIL-DTL-12468 - Decontaminating Agent, Stb
This specification covers one type of decontaminating agent called Super Topical Bleach (STB) for military use.
MIL-DTL-13528 - Hydrochloric Acid, Inhibited, Rust-Removing
This specification covers inhibited hydrochloric acid for use in removing heavy rust deposits from steel surfaces.
MIL-DTL-21567 - Compound, Silicone, Soft Film
This specification covers one grade of silicone compound with a corrosion inhibitor for application to unpainted threaded or nonthreaded mating surfaces of ferrous components between -65 degrees Fahrenheit (degrees F) (-53.89 degrees Celsius (degrees C)) and 160 degrees F (71.1 degrees C). It is also appropriate for use as a lubricant for components fabricated from rubber (see 6.1).
MIL-DTL-24577 - Distiller Scale Preventive Treatment Formulations
This specification covers one type of general purpose distiller scale preventive treatment formulation.
MIL-DTL-27686 - Inhibitor, Icing, Fuel System (S/S By Mil-Dtl-85470)
This specification covers the requirements for one type of fuel system icing inhibitor soluble in jet turbine fuels. Fuel System Icing Inhibitor is identified by NATO Code NumberS-748 (see 1.2 and 6.7).
MIL-DTL-4339 - Corrosion Preventive, Soluble Oil For Water Injection Systems (Nato Code Number C-630)
This specification covers the requirements for one type of corrosion preventive soluble oil conforming to NATO Code Number C-630, used in water-alcohol mixtures. These water-alcohol mixtures are used as thrust augmentation in certain jet aircraft engines and as anti-detonation or internal coolant fluids in certain reciprocating engines (see 6.1 and 6.6).
MIL-DTL-46110 - Coating Compound, Oxide Black
This specification covers one grade of a coating compound for use in the blackening ferrous metals to conform to MIL-DTL-13924, class 1 (for wrought iron, plain carbon, and low alloy steels).
MIL-DTL-47113 - Compound, Heat Sink, Silicone And/Or Non-Silicone
This specification covers a silicone or non-silicone heat sink compound which is applied to the base and mounting studs of transistors and diodes to provide a positive heat sink seal.
MIL-DTL-51027 - Antisetting Compound, Decontaminating Slurry, M2
This specification covers one type of antisetting compound.
MIL-DTL-85470 - Inhibitor, Icing, Fuel System, High Flash Nato Code Number S-1745
This specification covers the requirements for one type and grade of a high flash, fuel system icing inhibitor soluble in aircraft turbine engine fuel. This inhibitor is primarily composed of diethylene glycol monomethyl ether and is commonly referred to as DiEGME.
MIL-DTL-87934 - Desiccant, Molecular Sieve (Impregnated)
This specification covers one type of sodium alumina-silicate molecular sieve desiccant.
MIL-E-14114 - Etching Compound, For Glass Or Quartz
MIL-E-22864 - Emulsifier, Oil Slick
MIL-F-13927 - Fungus Resistance Test; Automotive Components (S/S By Astm-G21)
This specification covers methods of testing automotive components for resistance to fungus attach to determine conformance to requirements specified in the item specification.
MIL-F-16952 - Fountain-Solution, Parchment Paper Plate, For Offset Duplicating Process
MIL-F-27351 - Fluid, Calibrating, High Flash Point, Aircraft Fuel System Components (S/S By Mil-Prf-7024)
This specification covers the requirements for a high flash point test fluid for use in the calibration of fuel system components for aircraft reciprocating engines, aircraft gas turbines, and ram-jet engines.
MIL-F-53040 - Fuel Premix, Methanol-Water, For Fuel Cell Powerplants
This specification covers methanol-water premix fuel for use in fuel cell powerplants utilized in electric power generators at various environmental conditions.
MIL-F-5566 - Fluid, Anti-Icing (Isopropyl Alcohol) (S/S By Tt-I-735A)
MIL-G-22991 - Glass Cleaner (Use P-P-560)
MIL-G-51145 - Glazing Compound, Baking Pan
This specification establishes requirements for a baking type of glazing compound.
MIL-G-53042 - Gum Preventive Compound, Gasoline
This specification covers one type and one grade of gasoline gum preventive compound, a mixture of antioxidant and metal deactivator to be added to gasoline to retard the formation of gum.
MIL-H-6118 - Hooks, Arresting Gear, Chromium Plating Of
MIL-H-81829 - Heat Transfer Fluid, Fluorochemical (S/S By Sae-Ams-H-81829)
This specification covers inert, fluorochemical, liquid heat transfer agents.
MIL-I-00285 - Impregnite Unstabilized (Cc2) And Stabilized (Xxcc3)
This specification covers two types of impregnite.
MIL-I-17433 - Inhibitor, Hydrochloric Acid Descaling And Pickling Solutions
This specification covers liquid inhibitors for minimizing the deleterious effects of hydrochloric (muriatic) acid on metal, while not interfering with the removal of either waterside deposits or corrosion products present on the surface.
MIL-I-17563 - Impregnants For Cast Of Powder Metal Components
This specification covers the requirements for impregnants suitable for use in sealing the voids found in cast or powder metal components which cause leaking of contained fluids. This specification covers the impregnants in bulk form only and not after they have been used to impregnate the metallic components.
MIL-I-19528 - Inhibitor, Corrosion, Liquid Cooling System (Dichromate Type)
MIL-I-19684 - Inspection Penetrants, Nondestructive Testing
MIL-I-19841 - Inhibitor, Corrosion, Soluble-Oil (Use Mil-I-24453)
MIL-I-19867 - Inspection Kit, Penetrant, Naval Shipboard (Use Mil-I-19684)
MIL-I-22110 - Inhibitors, Corrosion, Volatile, Crystalline Powder
This specification gives the requirements for volatile corrosion inhibitors(VCI) in crystalline powder form. The corrosion inhibiting vapors from the crystals shall provide corrosion protection for most metals under specific conditions. The crystals shall be one type for general application.
MIL-I-23310 - Inhibitor, Corrosion, Volatile, Oil Type
This specification establishes the requirements for oil type volatile corrosion inhibitors, used for the preservation of materials in ┬┐closed┬┐ systems.
MIL-I-25135 - Inspection Materials, Penetrants (S/S By Sae-Ams2644)
This specification covers materials used in the liquid penetrant inspection of metal and nonporous, nonmetal parts for material discontinuities open to the surface.
MIL-I-285 - Impregnite, Unstabilized (Cc2) And Stabilized (Xxcc3)
MIL-I-292 - Impregnite, Xxcc3
MIL-I-82051 - Inhibitor, Corrosion, Basic Magnesium Sulfonate (For Use With Lubricating
MIL-I-82410 - Inhibitor, Corrosion, Liquid Cooling System (Dichromate Type)
MIL-I-85062 - Inhibitor, Corrosion, Volatile, Transmission And Gearbox
This specification covers a volatile corrosion inhibitor used, when added to a lubricating oil, for the preservation of non-operating transmissions and gearboxes.
MIL-L-50083 - Lithographic Plate Lacquer, Surface
MIL-L-83795 - Layout Dye, Blue (S/S By A-A-59168)
MIL-M-22183 - Metal Cleaner, Scouring Powder, Rust Removing And Surface Brightening
MIL-P-2018 - Paint, Face, Camouflage
This specification covers solid form camouflage paint for the face and body in a compact-type container with four colors or in a double ended tube dispenser with a two-color stick.
MIL-P-24138 - Passivator Compound, Navy Boiler
This specification covers a uniform mixture containing essentially dust free, granular sodium nitrite, monosodium phosphate and disodium phosphate. No other materials shall be incorporated into the passivator.
MIL-P-3542 - Primer, Pressure-Sensitive Tape
MIL-P-50002 - Phosphate Coating Compounds, For Phosphating Ferrous Metals (S/S By A-A-59267)
MIL-P-83770 - Potassium Dichromate - Sulfuric Acid Test Solution (Metric)
MIL-PRF-11090 - Cleaning Compound, Degreasing And Depreserving Solvent
This specification covers one class of biodegradable degreasing and depreserving cleaning compound, suitable for use in removing oils, greases, asphalt, tars, and rust preventive compounds, other than a wax type, from metallic and painted surfaces.
MIL-PRF-24453 - Inhibitor, Corrosion, Soluble Oil
This specification covers a petroleum base soluble oil corrosion inhibitor, compound with such additives as necessary to minimize rust formation and corrosion in water systems.
MIL-PRF-24548 - Penetrating Fluid
This specification covers the requirements for a penetrating fluid for direct, brush, or dip application to free corroded and frozen metallic parts without causing damage to such parts.
MIL-PRF-25017 - Inhibitor, Corrosion/Lubricity Improver, Fuel Soluble (Nato S-1747)
This specification covers one type of fuel-soluble corrosion inhibitor/lubricity improver additive for use in aviation turbine fuel, motor gasoline, diesel fuel, and related petroleum products.
MIL-PRF-25567 - Leak Detection Compound, Oxygen Systems
This specification covers two types of a gas leak detection compound that is compatible with oxygen. The leak detection compound is intended for use in detecting leaks in both high- and low-pressure oxygen systems in aircraft and other related oxygen systems.
MIL-PRF-29602 - Cleaning Compounds, Parts Washer And Spray Cabinet
This specification covers two types of cleaning compounds used in parts washers and spray cabinets for cleaning aircraft components.
MIL-PRF-372 - Cleaning Compound, Solvent (For Bore Of Weapons)
This specification describes the performance requirements and verification methods for a type of solvent cleaning compound, also known as rifle bore cleaner (RBC), for use in removal of copper fouling and firing residue in the bore of weapons. This product is for use in cleaning caliber military weapons, operating in the temperature range of 0 to + 43 degrees C (+32 to +110 degrees F). (See 6.1).
MIL-PRF-38299 - Fluid, Purging, For Preserving Fuel Tanks Of Jet Aircraft
This specification covers the requirements for a fluid for use in purging and preserving fuel tanks of jet aircraft before hangaring of aircraft for scheduled maintenance.
MIL-PRF-47009 - Compound, Silicone, Heat Sink
This specification covers four types of one-part ready-to-use silicone heat sink compound.
MIL-PRF-83779 - Water Indicating Paste
This specification covers water indicating paste used to determine the water level in tanks of aviation jet fuels and marine diesel.
MIL-PRF-85570 - Cleaning Compounds, Aircraft, Exterior
The cleaning compounds covered by this specification are used for cleaning the exterior surface of aircraft.
MIL-PRF-85704 - Cleaning Compound, Turbine Engine Gas Path
This specification establishes the requirements for three types of turbine engine gas path cleaning compounds, two are used for off-line (starter cranked) engine cleaning operations and one is used for on-line (fired) engine cleaning.
MIL-PRF-87937 - Cleaning Compound, Aerospace Equipment
This specification establishes the requirements for biodegradable, water dilutable, environmentally safe cleaning compounds for use on aerospace equipment to include aircraft, aerospace ground equipment (AGE) and AGE engines.
MIL-R-81261 - Rain Repellent, Glass Window And Windshield, For In-Flight Application
This specification covers the requirement for a rain repellent formulation to be applied during flight in rain.
MIL-R-83055 - Rain Repellent Dispensing Systems, Aircraft Windshield, General Specification For (S/S By Mil-E-87145)
MIL-R-83056 - Rain Repellents, In-Flight Applied, Aircraft Windshield (S/S By Mil-R-81261)
MIL-R-83213 - Remover, Potting Compound, Solvent Type
This specification covers two types of solvent removers for stripping potting compounds from electrical components. The removers may be furnished as a one component compostition or as a two component composition to be mixed equal parts by volume at time of use.
MIL-S-10561 - Solvent, Cleaning, High Temperature Pressure Spray
MIL-S-10699 - Salt, Heat Treating (For Metals)
MIL-S-12382 - Solvent, Carbon-Loosener
MIL-S-16506 - Sea Marker, Fluorescein, Rescue, Canister Type (S/S By Mil-S-17980)
MIL-S-17980 - Sea Marker Packet, Inflatable Survival Equipment
This specification covers the requirements for one type and size of an inflatable survival equipment sea marker packet.
MIL-S-19335 - Sea Marker Dye, Fluorescein
MIL-S-21614 - Scale Removing Compound (S/S By P-S-120)
MIL-S-23496 - Scale Conditioning Compound, Alkaline, Hot Section Jet-Engine Parts (Use Mil-D-26549)
MIL-S-2785 - Shark Repellent Compound, Packet
MIL-S-3748 - Scale Remover For Water Distillation Units.
MIL-S-43910 - Spot Remover, (For Removal Of Oil And Grease From Clothing) (S/S By A-A-52100)
MIL-S-4628 - Sea Marker, Fluorescent, Packet (S/S By Mil-P-17980)
MIL-S-53021 - Stabilizer Additive, Diesel Fuel
This military specification covers a stabilizer additive for use in diesel fuel's meeting the requirements of VV-F-800 which are intended for intermediate (6-24 months) or long-term (25-60 months) storage.
MIL-S-8660 - Silicone Compound, Nato Code Number S-736 (S/S By Sae-As8660)
MIL-STD-1163 - Lithographic Chemicals
The purpose of this standard is to designate the standard items for use in Military application and to provide performance characteristics, technical description, uses and limitations, interchangeability, safety and handling precautions, labeling information, specific packaging, storage data (including shelf life) and applicable procurement documentation for each designated standard item.
MIL-STD-1210 - Fog And Ice Preventive Compounds
This standard is a presentation of nomenclature, symbols, physical and chemical properties and requirements, military and typical commercial uses, directions for use, packaging data, labeling, general safety precautions, storage information, and shelf life of all military standard fog and ice preventive compounds.
MIL-STD-1211 - Indicators
This standard is a presentation of nomenclature, symbols, chemical and physical properties and requirements, military use, directions for use, packaging data, labeling storage information, and shelf life of all military standard indicators.
MIL-STD-1215 - Water Purification Compounds
This standard is a presentation of nomenclature, formulas, physical and chemical properties, specification requirements, military and typical commercial uses, safety information, storage information and disposal information for water purification compounds.
MIL-STD-1216 - Preventive Compounds (Corrosion) And Inhibitors
This standard is a presentation of nomenclature, symbols, physical and chemical properties and requirements, military and typical commercial uses, directions for use, packaging data, labeling, general safety precautions, storage information, and shelf life of military corrosion preventive compounds and inhibitors coming under FSC 6850.
MIL-STD-1221 - Protective Compounds (For Personnel)
This standard is a presentation of nomenclature, symbols, physical and chemical properties and requirements, military and typical commercial uses, directions for use, packaging data, labeling, general safety precautions, storage information, disposal data, toxicity data and shelf life of all military standard protective compounds (for personnel).
MIL-STD-1426 - Miscellaneous Compounds
This standard is a presentation of nomenclature, symbols chemical and physical properties and requirements, military and typical commercial uses, directions for use, packaging data, labeling, storage, and shelf life of military standard miscellaneous compounds.
MIL-STD-1427 - Activated Desiccants (Metric)
This standard is a presentation of nomenclature, symbols, physical and chemical properties and requirements, military and typical commercial uses, directions for use, packaging data, labeling, storage information, and shelf life of military activated desiccants.
MIL-STD-1428 - Cleaning Compounds
This standard is a presentation of nomenclature, symbols, physical and chemical properties and requirements, military and typical commercial uses, directions for use, packaging data, labeling general safety precautions, storage information, shelf life, and waste disposal instructions for military standard cleaning compounds (except for aircraft for aircraft surfaces).
MIL-T-24209 - Testing Outfit, Feedwater, Dissolved Oxygen Naval Shipboard
MIL-T-3457 - Tablets, Water Purification, Individual, Chlorine
MIL-W-283 - Water Purification Tablet, Iodine
This document covers one type and grade of iodine water purification tablet suitable for purification of water in canteens (see 6.1).
MIL-W-81244 - Wetting Agent
MS35497 - Asphaltum, Lithographic
MS35544 - Lacquer, Lithographic For Surface Plates
MS35618 - Rosin, Powdered, Lithographic, Colors, Container Sizes, And Use Characteristics Thereof
MS35733 - Lithographic Plate Lacquer, Deep Etch, Colors, Container Sizes, And Use Characteristics Thereof
MS35936 - Desiccant, Activated Bagged Type, For Static Dehumidification (S/S By Mil-Std-1427)
MS35937 - Desiccant, Activated Bulk Type, Anhydrous Calcium Sulfate (S/S By Mil-Std-1427)
MS35938 - Desiccant, Activated Bulk Type, For Dynamic Dehumidification (Use Mil-Std-1427)
MS36419 - Carbon Removing Compound Single Phase (S/S By P-C-111)
MS36420 - Carbon Removing Compound Orthodichlorobenzene (S/S By Mil-C-25107)
MS36421 - Cleaning Compound, Aluminum Surface
MS36422 - Cleaning Compound, Alkali, Ferrous And Nonferrous Surface
MS36423 - Cleaning Compound, High Pressure Cleaner Steam
MS36424 - Cleaning Compound, Solvent Grease Emulsifying
MS36425 - Cleaning Compound, Solvent Oxygen Systems
MS36426 - Cleaning Compound, Solvent Oil-Cooler
MS36427 - Cleaning Compound, Water Wash, Paint Spray Booth
MS36428 - Corrosion Removing Compound Phosphoric Acid Base
MS36429 - Corrosion Removing Compound Sodium Hydroxide Base
MS36430 - Corrosion Removing Compound Paste, Phosphoric Acid Base
MS36431 - Metal Cleaner, Silicate-Soap
MS36432 - Scale Removing Compound
MS36433 - Corrosion Removing Compound Hydrochloric Acid Base
MS36434 - Cleaning Compound, Solvent Fuel Tank And Bilge (S/S By Mil-C-22230)
MS36435 - Cleaning Compound, Solvent, Heavy Duty (S/S By O-C-1824)
MS36436 - Cleaning Compound, Solvent Self-Emulsifying (S/S By Mil-C-11090)
MS36437 - Cleaning Compound, Solvent Bore Cleaner (S/S By Mil-C-372)
MS602 - Formula For Test Solvent (For Fuel Thickeners)
O-A-548 - Antifreeze/Coolant, Engine: Ethylene Glycol, Inhibited, Concentrated (S/S By A-A-870)
O-A-549 - Anti-Fogging Compound
This compound covered in this specification shall be of one grade, and is intended to prevent fogging on all transparent or reflective surfaces.
O-B-420 - Bleach, Laundry, Organic Chlorine
This specification covers one type of organic chlorine, dry laundry bleach.
O-C-00432 - Cleaning Compound, Engine Cooling System
This specification covers a cleaning compound and neutralizer for cooling systems of engines on motor vehicles.
O-C-00520 - Coating Material, Sensitizing For Photo-Offset Duplicating Process
O-C-1824 - Cleaning Compound, Solvent, Heavy Duty, Liquid
This specification covers a heavy duty, liquid compound suitable for removing such materials as oils, greases, asphalts, tars and some rust preventive compounds, from copper alloy (brass, bronze) and ferrous surface.
O-C-1889 - Cleaning Compound, Solvent
This specification covers one type and grade of safety solvent cleaning compound.
O-C-1901 - Cleaning Compound, Windshield (Solvent And Anti-Freeze, Concentrated) (S/S By A-A-59664)
O-C-289 - Chlorination Kit, Water Purification, (For Treatment Of Drinking Water)
This specification covers one type of small chemical kit for use in the disinfection of water in Lyster bags or other small containers.
O-C-430 - Cleaning Compound, Paint Brush
O-C-434 - Cleaning Compound, Solvent (Cold Operations) (Use O-C-1889)
O-C-435 - Cleaning Solution, And Rinsing Solution-Watch, Waterless
O-D-190 - Deicing-Defroster Fluid (Aerosol)
This specification covers an aerosol decing-defroster fluid to aid in the removal of frost and thin ice from vehicle windows.
O-D-190 - Deicing-Defroster Fluid (Aerosol)
This specification covers an aerosol deeicing-defroster fluid to aid in the removal of frost and thin ice from vehicle windows.
O-D-210 - Desiccant, Activated, Calcium Sulfate, Anhydrous
This specification covers two types of anhydrous calcium sulfate for use as a desiccant.
O-F-1044 - Fuel, Engine Primer: Cold Starting, In Pressurized And Nonpressurized Containers
This specification covers one grade of cold starting primer fuel (ether) which is dispensed from the types and classes of dispenser listed in 1.2.1.
O-F-615 - Fountain Solution, Aluminum Or Zinc Plate, For Offset Duplication Process
O-I-00490 - Inhibitor, Corrosion, Liquid Cooling System (Use Mil-A-53009)
This specification covers one type and one grade of corrosion inhibitor intended for inhibiting water in automotive cooling systems.
O-I-490 - Inhibitor, Corrosion, Liquid Cooling System (Use Mil-A-53009 & Mil-A-46153)
O-I-501 - Inhibitors, Pickling (For Use With Sulphuric Acid)
This specification covers inhibitors which when added to sulfuric acid pickling baths diminish the attack of acid on descaled areas without appreciably retarding the descaling rate.
O-L-1031 - Lithographic Solvent
O-L-1031 - Lithographic Solvent
O-L-160 - Leak Preventive Compound, Radiator
This specification covers one type of leak preventive compound for use in the cooling system of internal combustion engines.
O-L-298 - Lithographic Blanket-Roller Wash
This specification covers two types of cleaner for washing lithographic blankets and rollers.
O-L-298 - Litographic Blanket Roller Wash
O-L-300 - Lithographic Plate Sensitizing Coating, Surface
O-N-376 - Nitrobenzimidazole Nitrate, Photographic (N02C6H3Nhch, N.Hno3) (S/S By O-C-275)
O-P-1731 - Penetrating Fluid (S/S By A-A-3149)
O-P-1731 - Penetrating Fluid (S/S By A-A-3149)
This specification covers a penetrating fluid for loosening frozen and corroded metallic parts.
O-P-441 - Plate-Etch, Aluminum Or Zinc Plate, For Offset Duplication Process
O-R-1151 - Regenerator, Lithographic Blanket
This specification covers one type of a lithographic blanket regenerator.
O-S-61 - Salts, Nickel, For Electroplating And Electrotyping (S/S By O-H-765)
O-T-001430 - Toner, Xerographic Process
O-W-0035 - Wash, Blanket And Roller, For Offset Duplicating Process
The blanket and roller wash described herein is intended for use in washing and cleaning rubber blankets and rubber rollers of offset duplication presses.
O-W-1284 - Water Displacing Compound (With Corrosion Inhibitor)
This specification covers two types of liquid compound which displace water from wet electrical, electronic and mechanical equipment and deposit a rust inhibiting film.
P-C-111 - Carbon Removing Compound
This specification covers one grade of a single phase type liquid carbon removing compound for soak tank use in softening and facilitating effective removal of carbon, gum, and other surface contaminants (except rust and corrosion) from items such as automotive pistons, carburetors, fuel pumps and engine assemblies precleaned with degreasing solvent (see 6.1).
P-C-431 - Cleaning Compound, Synthetic Detergent, Non-Abrasive, All Purpose (S/S By P-D-220)
P-C-433 - Cleaning Compound, Alkali, Pipeline (S/S By A-A-1911)
This specification covers the requirements for an alkali type dry granular compound, suitable for cleaning drain lines.
P-C-436 - Cleaning Compound, Alkali, Boiling Vat (Soak) Or Hydrosteam (S/S By A-A-59146)
This specification covers one grade of alkaline cleaning compound for use in the hot soak tank cleaning of ferrous and nonferrous alloy parts.
P-C-437 - Cleaning Compound, High Pressure (Steam) Cleaner (S/S By A-A-59133)
This specification covers alkaline steam cleaning compounds for use in steam cleaning machines for cleaning ferrous and nonferrous surfaces.
P-C-438 - Cleaning Compound, Optical Lens
P-C-444 - Cleaning Compound, Solvent Soluble, Grease Emulsifying
This specification covers two types of emulsifying solvent soluble cleaning compounds used to remove oil, grease and other foreign matter from various surfaces.
P-C-535 - Cleaning Compound, Platers Electrocleaning, For Steel (S/S By Sae-Ams1547)
P-C-610 - Corrosion Removing Compound; Scale Remover (Phosphoric Acid Base)
P-D-680 - Dry Cleaning And Degreasing Solvent(S/S By Mil-Prf-680)
P-D-680 - Dry Cleaning And Degreasing Solvent
P-G-411 - Glass Cleaner, Powder
P-M-00200 - Metal Cleaner, Phosphoric Acid Base (S/S By P-C-610)
P-S-120 - Scale Removing Compound (Solid And Liquid Form) (S/S By A-A-19 And A-A-33)
P-S-411 - Skin Protective Compound, Chemical Barrier (S/S By A-A-50169)
P-S-661 - Solvent, Dry-Cleaning (S/S By P-D-680)
P-S-751 - Steam Cleaning Compound
QPL-11090-18 - Cleaning Compound, Degreasing And Depreserving Solvent
QPL-11755-6 - Antifreeze, Arctic-Type
QPL-12382-1 - Solvent, Carbon-Loosner
QPL-15042-4 - Compound, Anti-Fogging (For Eye Protective Equipment) (See Mil-A-13550)
QPL-15348-18 - Cleaning Oil, Turbine (Compounded)
QPL-17563-40 - Impregnants For Cast Or Powder Metal Components (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-17980-6 - Sea Marker, Fluorescein, Dye, Sodium Salt Type, Life Preserver Packet
QPL-19841-9 - Inhibitor, Corrosion, Soluble-Oil
QPL-19853-15 - Carbon Removing Compound (For Use In Agitated Tank) (S/S By Qpl-Ams-C-19853)
QPL-20218-2 - Chromium Plating, Electro-Deposited, Porous
QPL-21567-4 - Compound, Silicone, Soft Film
QPL-21665-9 - Catalyst, Carbon Monoxide And Hydrocarbon Oxydizing (For Use In An Air Purifying Device Aboard Submarines)
QPL-22110-10 - Inhibitors, Corrosion, Volatile, Crystalline (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-22542-22 - Cleaning Compound, High Pressure Cleaner, Liquid (S/S By Qpl-Ams-C-22542)
QPL-22543-7 - Cleaning Compound, Water-Emulsion (Alkaline-Organic-Water Base)
QPL-23310-9 - Inhibitors, Corrosion, Volatile, Oil Type
QPL-23496-3 - Scale Conditioning Compound, Alkaline, Hot Section Jet-Engine Parts
QPL-24453-14 - Inhibitor, Corrosion, Soluble-Oil (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-24577-15 - Distiller Scale Preventive Treatment Formulations (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-24682-2 - Additive, Fuel Oil Stabilizer
QPL-25017-22 - Inhibitor, Corrosion/Lubricity Improver, Fuel Soluble (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-25107-2 - Carbon Removal Compound, Orthodichlorobenzene, For Engine Parts
QPL-25135-17 - Inspection Materials, Penetrants (S/S By Qpl-Ams-2644)
QPL-25378-3 - Compound, Metal Conditioner And Brightner (For Use On Aluminum Surfaces)
QPL-25769-21 - Cleaning Compounds, Aircraft Surfaces, Alaline Water Base (S/S By Qpl-87936-1
QPL-26549-7 - Descaling Compound, Alkaline, Hot Section Jet Engine Parts (S/S By Sae-Ams1380)
QPL-2785-1 - Shark Repellant Compound, Packet
QPL-3464-82 - Desiccants, Activated, Bagged, Packaging Use And Static Dehumidification (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-372-26 - Cleaning Compound, Solvent (Flor Bore Of Small Arms And Automatic Aircraft Weapons) (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-38334-6 - Corrosion Removing Compound, Prepaint, For Aircraft Aluminum Surfaces
QPL-43616-16 - Cleaning Compound, Aircraft Surface
QPL-53021-10 - Stabilizer Additive, Diesel Fuel (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-5410-22 - Cleaning Compound, Aluminum Surface, Non-Flame-Sustaining
QPL-5543-9 - Cleaning Compound, Washing Machine, Aircraft Metal Parts
QPL-5545-16 - Corrosion Preventive, Aircraft Engine, Heavy Oil Type
QPL-5546-16 - Compound, Engine Cleaning (Cresol Base)
QPL-6529-24 - Corrosion-Preventative, Aircraft Engine (Replaced By The Qualified Products Database (Qpd) See Notice 2 For Additional Information)
QPL-6810-3 - Compound, Brightener (For Copper Oil Coolers)
QPL-6864-14 - Cleaning Compound, Solvent, Oil Cooler
QPL-6882-12 - Water Repellent, Window And Windshield, Glass And Plastic
QPL-7907-2 - Cleaning Compound, Decontaminating (For Soiled And Radioactive Contaminated Surfaces)
QPL-7946-4 - Deicing - Defrosting Fluid
QPL-81261-8 - Rain Repellent, Glass Window And Windshields, For In-Flight Applications
QPL-8188-19 - Corrosion-Preventive Oil, Gas Turbine Engine Aircraft Synthetic Base (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-83213-2 - Removers, Potting Compound, Solvent Type
QPL-83411-4 - Deicer/Anti-Icer Fluid (For Runways And Taxiways) (S/S By Ams-1432)
QPL-85062-3 - Inhibitor, Corrosion, Volatile, Transmission And Gearbox
QPL-85570-11 - Cleaning Compounds, Aircraft, Exterior (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-85704-8 - Cleaning Compound, Turbine Engine Gas Path (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-8660-11 - Silicone Compound, Nato Code Numbers S-736 (S/S By Qpl-As8660)
QPL-87159-1 - Cleaning Compound, Water Dilutable, Heavy Duty For Aircraft Surfaces (S/S By Qpl-87936-1)
QPL-87936-8 - Cleaning Compounds, Aircraft Exterior Surfaces, Water Dilutable
QPL-87937-13 - Cleaning Compound, Aerospace Equipment (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-O-A-548-14 - Antifreeze/Coolant, Engine: Ethylene Glycol, Inhibited, Concentrated (S/S By A-A-870)
QPL-O-I-501-11 - Inhibitors, Pickling (For Use With Sulfuric Acid)
QPL-P-C-00576-6 - Cleaning Compound, Solvent, Grease Emulsifying
QPL-P-C-111-26 - Carbon Removing Compound
QPL-P-C-436-6 - Cleaning Compound, Alkali Type
QPL-P-C-437-15 - Cleaning Compound, High Pressure (Steam) Cleaner
QPL-P-C-444-15 - Cleaning Compound, Solvent Soluble, Grease Emulsifying (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-P-C-576-6 - Compound, Grease-Cleaning, Solvent-Emulsion Type
TT-L-132 - Lithographic Plate Asphaltum Solution
TT-W-132 - Washout Solution, Print (Or Image) For Offset Duplicating Process (S/S By Tt-L-132)
VV-G-800 - Gum Preventive Compound, Gasoline
ZZ-B-417 - Blanket, Lithographic, Offset Press, Rubber
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business